1 / 3
Press-fit Foot + TPU damping pad  for TwoTree TTC3018Pro CNC Router — zdjęcie 1
1 / 3

Press-fit Foot + TPU damping pad for TwoTree TTC3018Pro CNC Router

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Press-fit foot with TPU damping pad for bottom aluminium profiles of the TTC3018Pro CNC Router.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Two models - each to be printed 4 times:

  1. The foot to be press-fit attached to the lower aluminium profiles of the TTC3018Pro. Use slicer sizing if the fit is too tight or loose. Standard print in PLA or PETG. Support recommended. Use concentric surface patterns.

  2.  The anti-vibration/damping insert to be printed in TPU 95A (or 85A - softer, but more difficult to print) with about 10% infill. Use concentric surface patterns.

Tagi