Walksnail VRX Ground-station With Duel GEPRC Triple-feed Patch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Walksnail VRX Ground-station with duel GEPRC Triple-feed Patch and tripod mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
Overview
Upgrade your FPV ground station with this custom tripod mount designed specifically for the Walksnail VRX and dual GEPRC Triple Feed Patch Array antennas.
This functional upgrade provides a highly rigid, solid mechanical structure that keeps your heavy patch antennas perfectly stable and properly cleared from the VRX unit, preventing mechanical stress and allowing for clean cable routing.
Key Features
Solid Stability: Specifically engineered to handle the weight and wide footprint of two large GEPRC patch antennas without flexing or sagging.
Optimal Clearance: Elevates and separates the antennas from the Walksnail VRX, ensuring no physical interference and leaving plenty of room for cooling and cable management.
Tripod Ready: Consolidates your receiver and directional antennas into one unified block that mounts cleanly to a standard tripod.
Recommended Print Settings
Material: PETG is highly recommended for this build. It offers the necessary flexibility, impact resistance, and temperature stability needed for outdoor flying sessions.
Perimeters/Walls: 3 to 4 perimeters for structural strength, especially around the mounting holes.
Infill: 25% - 40% (Gyroid or Cubic patterns work best for overall rigidity).
Hardware Required (BOM)
To complete the assembly, you will need the following metric hardware:
6x M3 Heated Threaded Inserts
6x M3 Socket Head Screws (Choose the appropriate length based on your specific assembly depths)
Assembly Notes Use a soldering iron to carefully press the 6 M3 heated inserts into the mounting points on the bracket. Allow the plastic to cool completely before using the M3 screws to mount the antenna plates and secure the structure to your VRX.