Inflatable pool drain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The inflatable pool has a drain hole at the bottom, but it barely drains. With this, it does
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The inflatable pool that I have, has a drainage hole at the bottom. However, due to the water pressing down on the bottom layer around the hole, it barely drains. This inflatable pool drain is designed to fit under and inside the hole to help the water flow away unhindered and therefore faster.
The drain is designed with different parts. You have to at least print the 'Inflatable pool drain'. Depending on the thickness of the walls of your pool, you might also need an extension and connector (or two). The drain and extension are 150 mm long to make it printable on smaller printers. The connector is designed with a tight fit, so it might need some force to apply, but stays in place afterwards. If you like a more loose fit, you can scale the connector with a few percent. The inner dimensions are 10x50 mm
I printed mine with PLA without supports or a brim, mainly because I ran out of PETG. Despite that, I can stand on it without the drain breaking, but I think PETG might be the more durable choice here. When printing in PETG, a brim might be needed, especially for the connector.
I haven't been able to test it on my pool just yet (temperatures have thankfully dropped here the last few weeks), but I'm confident it will work and will update when I have tested it. At least it is able to drain the water of my faucet.