Stick Lock Mod for Miniloong Pocket 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Non-invasive mod for MLP1 retro handheld. Locks the analog stick's movement while keeping RGB and L3 button functional.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I only play D-pad games on this device, but I like to use use the L3 button as a turbo toggle and I wanted to be able to throw this in my pocket worry-free, so after some thinking, I cooked.
Print the clear ring with "glass" settings, and make sure your materials are dialed in, tolerances are tight on purpose.
My unit: PETG @0.1mm layer height with a 0.4mm nozzle + semi-gloss topcoat.
!!! See part notes for more instructions !!!
Changelog:
The model now prints face up instead of face down;
The clear part is slightly recessed for a more tactile feel;
The whole side surface is curved and also has recessed lines for better look and feel.