1 / 4
Arachnid cookie cutter — zdjęcie 1
1 / 4

Arachnid cookie cutter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enjoy your arachnid-themed cookies with this cookie cutter!

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

Spider-Man Cookie Cutter and Stempel

This model is designed as a single piece that cuts out the outline while simultaneously stamping the details of the mask and the web. It works well with cookie dough, fondant, or modeling clay.

Recommended Print Settings

To ensure the mold is sturdy and the cutting edge doesn’t break when pressure is applied, I recommend using these settings:

Layer height: 0.16 mm. This helps capture small details clearly.

Wall loops: 4 or 5. The cutting edge is thin and needs to be printed nearly solid.

Fill: 15% to 20% using the Gyroid pattern.

Wall generator: Arachne. This is key to ensuring the fine lines of the spiderweb pattern remain continuous and free of gaps.

Ironing: Enabled only on the top layer. This leaves the stamp smooth and makes it easier to peel off the dough.

Material: PLA or PETG.

Usage and Cleaning Tips

Roll out the dough to a thickness of about 7 to 9 mm.

Dust the mold with flour before each cut to prevent the dough from getting stuck in the spiderweb pattern.

A good tip if the dough is very sticky is to place plastic wrap over it before pressing. The design transfers perfectly, and the cutter stays clean.

Wash it by hand with warm water and soap. Do not use very hot water or put it in the dishwasher, or the plastic will warp.

Tagi