1 / 1
Royal Courtyard – Throne of Stone and Ruin | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Royal Courtyard – Throne of Stone and Ruin | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Detailed Royal Courtyard display base with cracked stone, skulls, and throne steps—ideal for fantasy miniatures.

Ocena
0 / 5
Polubienia
15
Pobrania
74
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Royal Courtyard serves as a majestic yet battle‑scarred display base, perfect for showcasing your fantasy miniatures. Sculpted with layered stone steps, fractured tiles, and a central throne flanked by broken pillars, it evokes the grandeur of a fallen kingdom. Weathered banners and scattered skulls add a haunting touch of history, making this base ideal for heroes, monarchs, or villains alike.

Designed for resin or FDM printing, the model captures intricate surface detail and natural stone texture—perfect for painters, diorama builders, and collectors seeking a dramatic stage for their figures.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best texture fidelity

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Flat base with minimal support required

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi