1 / 4
Ubiquiti Cloud Gateway Fiber OEM PSU mount — zdjęcie 1
1 / 4

Ubiquiti Cloud Gateway Fiber OEM PSU mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mount bracket for OEM PSU that ships with the Ubiquiti Cloud Gateway Fiber

Ocena
0 / 5
Polubienia
3
Pobrania
41
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ubiquiti Cloud Gateway Fiber OEM Power Supply Wall Mount

Keep your Ubiquiti Cloud Gateway Fiber power supply neatly mounted with this custom-designed wall bracket. Designed specifically for the original OEM power adapter included with the Ubiquiti Cloud Gateway Fiber (UCG Fiber), this mount provides a clean, organized installation for network closets, structured media panels, utility rooms, offices, and home labs.

The power supply securely slides and snaps into place while still allowing easy removal when needed. Its low-profile design helps reduce cable clutter and gives your installation a clean, professional appearance.

Features

  • Designed specifically for the Ubiquiti Cloud Gateway Fiber OEM power supply

  • Secure wall or surface mounting

  • Clean, professional cable management

  • Easy removal and reinstallation of the power supply

  • Lightweight yet durable 3D-printed design

Installation

Mount the bracket to a wall, cabinet, rack board, or other flat surface using appropriate screws (mounting hardware not included). Once installed, simply slide the power supply into the holder until it is fully seated.

Important Notes

  • Designed for the original OEM Ubiquiti Cloud Gateway Fiber power supply only.

  • This model has not been tested with third-party replacement power adapters.

Ideal For

  • Ubiquiti Cloud Gateway Fiber installations

  • Structured media panels

  • Home labs

  • Utility closets

  • Wall-mounted networking equipment

  • Clean cable management

Printing Recommendations

PrusaSlicer Settings

  • Layer Height: 0.20 mm

  • Perimeters: 4

  • Infill: 15–20% Grid (15% has been tested successfully)

  • Supports: None

Recommended Slicer Modifier

For maximum durability, add a modifier in your slicer that sets the retaining tabs and the material directly beneath them to 100% infill. These features experience the highest stress during installation and removal, and increasing the infill significantly improves their strength and longevity.

Recommended Materials

  • PETG (recommended)

  • PLA+

Older filament or filament that has absorbed moisture can become brittle, particularly around the retaining tabs. Drying your filament before printing is recommended for the strongest results.


Related Model

Pairs perfectly with my Ubiquiti Cloud Gateway Fiber Wall Mount:

https://www.printables.com/model/1228449-ubiquiti-cloud-gateway-fiber-wall-mount-ucg-fiber


Prefer a Printed Version?

If you'd rather purchase a professionally printed version, you can find it in my Etsy shop:

https://www.etsy.com/listing/4489944945

Tagi