1 / 1
CFMOTO 800 MT-X Lazy Chain Tension Gauge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CFMOTO 800 MT-X Lazy Chain Tension Gauge
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Have a nice day, everyone!
Just a simple tool for a fast chain-tension check.
According to the manual, when pulling the chain down, the distance between the chain and the lowest point of the swingarm should not exceed 50 mm.
In my humble opinion, 55 mm is a little better and works just fine.
If you can squeeze the gauge between the swingarm and the chain, your chain is at an acceptable tension.
If you can't fit the gauge in between, you need to loosen your chain.
If you can still pull the chain down with the gauge in place, it's time to tighten it up.
