1 / 3
3.17mm shaft couplers — zdjęcie 1
1 / 3

3.17mm shaft couplers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 for mini sirens, 1 for if you actually need a shaft coupler for something else. (possibly more coming soon)

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

if printed in the correct filament, it should be perfectly friendly to the outdoors. most if not all of these are NOT thoroughly tested. so use at your own expense. the cylinders in the photos should be hollow (aka a hole through the thing) if this is not you. im sorry.  like i said before most of the models are NOT tested. (WARNING: do NOT use cura ultimaker to print this, i HIGHLY recommend you use bambu studio to print this, orca slicer has yet to be tested.) (orca slicer has been tested and works.)