Wio L1 Tracker Pro Recessed Antenna Case Mod 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of Flo's recessed antenna L1 Tracker case designed to improve strength and printability.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I really like Flo's version of the L1 Tracker Pro case as something with a recessed antenna was exactly what I had been looking for. Unfortunately I never got a fully successful print out their model. It's clearly possible to do, they obviously printed one for themselves, but it just refused to work for me. Holes in a few spots in the model when sliced and super thin walls in places that failed to properly fuse together or just left e with er little confidence that the case would survive my usage (I am infamously tough on my toys). So I went about remixing my own version. The case now has thicker walls, more support for the antenna, and eliminated a few elements that I either disliked or simple didn't need the Flo carried over from the original Seeed Studio version.
A couple notes for assembly.
You will almost certainly need to use a right angle SMA pigtail to get it to fit after I recessed the antenna a few more millimeters than Flo did. The stock pigtail likely won't work.
Double check the screws you are using. They need to be no bigger than M2s to fit through the mounting holes in the PCB and you will need a shorter screw for the top right (unless you want to put a screw through the antenna).
The extra material around the antenna mount means that I can only guarantee that the Gizont/Muzi works whip antennas will fit. But those are the antennas you should be using on your companion nodes most of the time anyway, so I didn't really see that as a problem when I modified the model.