1 / 12
Flamingo FP5 Cruise Missile Toy (supportless, non-functional) — zdjęcie 1
1 / 12

Flamingo FP5 Cruise Missile Toy (supportless, non-functional)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model Flamingo FP5 Cruise Missile assembled from 3 parts with imprinted screws and nuts or single-piece with supports.

Ocena
0 / 5
Polubienia
15
Pobrania
72
Wydruki
0
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Share Alike

This is a model of an Ukrainian Flamingo FP5 Cruise Missile. The geometry has been slightly adapted for supportless printing. You can choose from 2 printing options.

  • Use the full model to print in 1 piece with supports. 

  • Use the 3-part model (front, mid, back) to print supportless and assemble. 

    • The model is optimized for 0.25 mm layers. 

    • In the Slicer add pauses for all parts to insert. Add pause in the layers where the nut pockets are closed and where the inner diameter starts to shrink for the screws. See screenshots. 

    • Insert one M4 square nut into front part during print. 

    • Insert one M4 square nut and one K4x20 countersunk metric screw with hexagonal drive for 2.5 mm allenkey into mid part. The screw points towards nose, so insert head first. See Images. 

    • Insert one K4x8 countersunk metric screw with hexagonal drive for 2.5 mm allenkey into back part. The screw points towards nose so insert tip first. 

    • Use a long 2.5 mm allenkey to fasten screws. It fits through the nut forward to the screw drive. See image. 

    • Use a precision side cutter to cut away the 3 connections to the print aid in the back of the turbine. 

Have a look at the pictures as they tell how to print and assemble. 

If you do not have square nuts at hand you can also use my models for hexagonal standrd M4 nuts. 

Thank god its only a toy. 

Tagi