Elegoo CC1 Canvas Filament Spool Holder Relocator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates the spool holders when not using Elegoos Canvas intended mounting location.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Filament Spool Holders utilize the original spindle mounts supplied in the Canvas kit for the CC1. Narrows the overall profile and space required for the original mounting. Designed to be used with the following Canvas relocation model but could be used with others as well. It could be also used with the intended Canvas top side mount location if used in conjunction with added rollers or guides. Longer screws will be required for installation*. You will need 6 3mm x 10mm screws for mounting the spool relocators.
If relocating Canvas to the rear the Canvas spools 2 & 4 positions need to be swapped to allow for proper rotation for retraction.
Also included is a smaller spool holder file that will fit on the Canvas mount. If desired you can also install a spin on spool adapter on to the small spool holder. After printing the seam will need to be sanded or removed with a blade if using the spin on adapter.
The Canvas upgrade when installed as intended requires a large top enclosure. Being less than thrilled with the look of Canvas upgrade and not wanting to throw the vented riser already being used I simply made another solid riser to stack my original one on increasing the original CC1s height by 120mm(4.75 inches). That is the total height of both risers together. The original glass is also used. The tab included in the downloaded files is intended to be used along with the rear Canvas mount after trimming off the mounting tab of the Filament Guide if using with a fan silencer. The tab is needed also as a spacer under the connection of 3 & 4 numbered sections. See included pictures*.
Things to be aware of:
Not all riser models as designed allow the use of all Elegoo glass tops. Some glass tops are larger than others. It seems that the glass tops were procured from various manufactures and tolerances were not specific. If the designer used glass size instead of the recessed glass area of the printer your glass top may not fit.
This is another rear mount design.
Currently working on a Canvas mounted in the middle of the four spools. This would lower the height dramatically and allow much shorter riser. Stay tuned.