Hi Point carbine stock filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of plates to make the stock of the Hi Point Carbine look better. They can easily be installed with a set…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a set of plates to make the stock of the Hi Point Carbine look better.
They can easily be installed with a set of Chicago screws or, if necessary, with a small dowel rod.
I recommend the screws because gluing in the rods will be permanent. I used these screws:https://www.amazon.com/gp/product/B08LL53P11/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I do not know if this will fit any model besides the 995. It should be the same shape, but it may need to be scaled.
Print Settings
Printer:
Artillery SW X1
Rafts:
No
Supports:
No
Resolution:
.18
Infill:
20
Filament:
Solutech PLA
Black, Orange, any
Notes:
Easy to print on almost any printer, no rafts or supports
I started by taking a picture and filling in the parts I wanted

Then I converted to SVG using online tools. Then I imported to Tinkercad and evolved the current design.

After I was complete I found a product sold on Amazon which was very similar:https://www.amazon.com/gp/product/B07V6HHRVS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
If you print this it will be a bit thicker and a little more solid, but the Tejas product is pretty good and comes with decals and screws, so if you want this ready made, or with different patterns including real wood, I would recommend it.Category: Outdoor & Garden