Large airlift pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large airlift (mammoth) pump with venturi effect for deep pumping of water and mud using compressed air.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 119
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Build for a project where i need to get mud out of very deep holes.
Made for a 1\4" BSP fitting for compressed air hose coupling and 40mm PVC pipe.
Using low pressure/flow it works as a regular airlift pump. https://en.wikipedia.org/wiki/Airlift_pump
It contains internal channels and nozzles that produce a venturi effect at high pressure and airflow, making it able to lift much higher than a regular airlift pump.
Worked better than my expectations, even at 4m deep head lift it spits water 3 meters into the air, but this consumes a lot of air so isnt sustainable over time unless you have an enormous compressor.
No commercial sale, copying or use without my expressed permission. Modifications can be availible upon request.