AMD BC-250 "Playstation" Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom shell for the AMD BC-250 mining board designed to imitate the original Playstation
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 2123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
My custom Asrock BC-250 case designed to imitate the original Playstation (at 125% scale)
NOTE: This case will require some mild soldering and electrical expertise to assemble
Print information:
It is recommended to print all case files with 4 walls and 25% infill for an optimal finish.
All files are oriented correctly and the bottom shell comes pre-supported, Regular supports set to 10% overhang is required for the Mid Top piece.
It is highly recommended that you print with PETG. The feet should be printed in TPU.
Expect to use approximately 1.2kg of filament.
Bill of Materials:
https://docs.google.com/spreadsheets/d/1L13zMmRd_4MpuYEmTJudOHFpkt37Hs72zwldE6kkQjc/edit?usp=sharing
Assembly outline:
The assembly of the case is very straight-forward. All parts have been split up so they will fit on a 256x256 print bed. Securing the top parts together can either be done using glue or plastic welding (I recommend a mix of both)
You will need some soldering experience in order to trim and solder the cables/connectors listed in the BOM for the power supply and PCI-E connectors.
Fan orientation should be set as an intake and a powerful 140mm fan should be used (listed in BOM)