1 / 4
Display-Halterung für Disney Woody / Display Stand for Disney Woody (Toy Story) — zdjęcie 1
1 / 4

Display-Halterung für Disney Woody / Display Stand for Disney Woody (Toy Story)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This display stand was designed specifically for the approximately 40 cm Disney Woody talking figure from Toy Story.

Ocena
0 / 5
Polubienia
7
Pobrania
29
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

GERMAN DESCRIPTON IS BELOW!!

Display Stand for Disney Woody (Toy Story, approx. 40 cm Talking Figure)

This display stand was designed specifically for the approximately 40 cm Disney Woody talking figure from Toy Story. It supports the figure securely around the waist, allowing it to stand safely without tipping over.
The support holds the figure at approximately 19 cm from the base, with a total stand height of 22 cm.
Thanks to the 55 mm opening, the stand is also suitable for many other figures with similar dimensions.

Print Settings
Material: PETG
Infill: 15%
Color: White (any color will work)
Supports: Not required ( Print the parts lying flat to avoid the need for supports.)
Printer: Anycubic Kobra X

Features
Designed for the 40 cm Disney Woody talking figure
Secure waist support
55 mm inner opening
Compatible with other figures of similar size
Easy to print without supports
Enjoy printing! If you print one, I'd love to see your make and would appreciate a like.

Display-Halterung für Disney Woody (Toy Story, ca. 40 cm Sprachfigur)

Diese Display-Halterung wurde speziell für die ca. 40 cm große Disney Woody Sprachfigur aus Toy Story entwickelt. Sie hält die Figur sicher an der Hüfte, ohne dass sie umkippt oder zusätzlich befestigt werden muss.
Die Halterung greift die Figur auf einer Höhe von ca. 19 cm und besitzt eine Gesamthöhe von 22 cm.
Durch die 55 mm breite Aufnahme eignet sich der Halter nicht nur für Woody, sondern auch für viele andere Figuren mit ähnlichen Abmessungen.

Druckeinstellungen
Material: PETG
Infill: 15 %
Farbe: Weiß (beliebig möglich)
Supports: Nicht erforderlich (Bitte die Teile liegend drucken. So werden keine Supports benötigt.)
Drucker: Anycubic Kobra X

Eigenschaften
Passend für Disney Woody (ca. 40 cm Sprachfigur)
Sicherer Halt auf Hüfthöhe
55 mm Aufnahmebreite
Auch für andere Figuren mit ähnlichen Maßen geeignet
Einfach zu drucken, ohne Supports
Viel Spaß beim Drucken! Über Fotos eurer Drucke und ein Like freue ich mich sehr.

Tagi