1 / 3
Fiat 500 / Abarth 500 - 165mm (6.5") Speaker Adapter (12mm, M4 Inserts) — zdjęcie 1
1 / 3

Fiat 500 / Abarth 500 - 165mm (6.5") Speaker Adapter (12mm, M4 Inserts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy-duty 12mm speaker adapter for Fiat 500 / Abarth 500 with M4 heat inserts & cable notch. Fits 165mm DIN woofers.

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Overview Heavy-duty 12mm speaker adapter ring for Fiat 500 / Abarth 500 (Mk312) (Tested with Fiat 500 312). Designed to replace flimsy commercial plastic brackets with a rigid, resonance-free 3D-printed solution. Fits standard 165mm (6.5") aftermarket woofers (DIN standard).

Features

  • 12mm Thickness: Ensures perfect clearance between the speaker magnet and the window glass mechanism inside the door. (Tested with Fiat 500 312)

  • 8x M4 Heat-Set Insert Pockets: Uses standard brass inserts for solid, repeatable speaker mounting.

  • Wire Notch: Integrated cable passage at 6 o'clock position to keep wiring in the dry area.

  • DIN Standard Bolt Circle (155.5mm): Compatible with Eton (PRA/POW), Hertz, Focal, Alpine, and most 165mm aftermarket speakers.

Bill of Materials (BOM) per door:

  • 1x Printed Adapter Ring

  • 8x M4 Heat-Set Inserts (e.g. Ruthex M4x8.1) Remark: The heat inserts are on the opposite side of the speaker to ensure proper seating.

  • 8x M4 Stainless Steel Screws

  • Butyl Sealing Tape (between door metal and ring)

  • You may add a layer of silicone, rubber or similar between the ring and the speaker to ensure that the mount is air tight.

Recommended Print Settings:

  • Material: PETG, ABS, ASA or PC (Tested with PETG - Do NOT use PLA – temperature in car doors during summer easily exceeds PLA's heat deflection limit!).

  • Walls / Perimeters: 4 to 5 (Crucial for solid threads and insert retention).

  • Infill: 30% - 40% (Gyroid or Grid).

  • Layer Height: 0.20mm - 0.28mm (printed fine with 0.4mm or 0.6mm nozzles) (Tested with 0.4mm nozzle).

  • Supports: None needed.

Tagi