Fortified Watchtower — 28mm / 1:56 Tabletop Terrain

A two-storey brick watchtower for tabletop battles, skirmish games and dioramas: hip roof, a balcony wrapping right around the upper floor, and a wide double gate below.

Inside there is a straight staircase and half-height partition walls. Upstairs, two double doors open onto the balcony. Windows have sills and muntins and print without glazing.

The surfaces carry real printed relief - the brickwork on the walls and the clay tiles on the roof are modelled into the geometry, not a printed-on image.

PRINTING

Scale 1:56 (28 mm) - approx. 170 x 170 mm footprint, 182 mm tall

25 parts, pre-oriented flat, no supports needed

Included twice over: 5 ready-to-slice Bambu Studio plates (.3mf) and the same 25 parts as individual .stl files, converted 1:1 from those plates - identical geometry, so any slicer works

0.20 mm layer, 2 walls, 8 % infill - approx. 23.8 h on the reference profile

Plug-together assembly, no glue required

The colours are just my filament choices - swap freely

Pairs with the ruined version of the same tower.

HOW THIS MODEL WAS MADE

I generated this tower in my browser with PrintHaus, the parametric CAD generator for 3D-printable buildings that I develop. It is not an AI model - every wall, roof plane and opening is real parametric solid geometry. I set a 6.5 x 6.5 m plan with a 5 m hall below, a 25 degree hip roof and a wrap-around corner balcony, picked 1:56, and exported the files you see here.

You can try it free in your browser: https://printhaus.app

PrintHaus is launching on Kickstarter - following the pre-launch page costs nothing and notifies you when it goes live: https://www.kickstarter.com/projects/cforms/printhaus-your-custom-home-ready-to-print