1 / 6
Fortified Watchtower RUIN — 28mm / 1:56 Tabletop Terrain — zdjęcie 1
1 / 6

Fortified Watchtower RUIN — 28mm / 1:56 Tabletop Terrain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Blown-open brick watchtower shell, roof torn away, upper floor gutted. 28mm / 1:56. 3MF + STL.

Ocena
0 / 5
Polubienia
5
Pobrania
6
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A ruined version of my two-storey brick watchtower: a direct hit has torn the roof away and gutted the upper floor, leaving a roofless, battle-scarred shell for tabletop battles, skirmish games and dioramas.

The brickwork on the walls is real printed relief, modelled into the geometry, not a printed-on image. Windows have sills and muntins and print without glazing.

Print it alongside the intact tower for a before/after pair, or a diorama where one tower still stands.

PRINTING

Scale 1:56 (28 mm) - approx. 117 x 117 mm footprint, 100 mm tall

8 parts, pre-oriented flat, no supports needed

Included twice over: 4 ready-to-slice Bambu Studio plates (.3mf) and the same 8 parts as individual .stl files, converted 1:1 from those plates - identical geometry, so any slicer works

0.2 mm layer, 2 walls, 12 % infill - approx. 6.6 h and about 117 g PLA on the reference profile

The colours are just my filament choices - swap freely

HOW THIS MODEL WAS MADE

This is the same tower as my intact Fortified Watchtower, generated in my browser with PrintHaus, the parametric CAD generator for 3D-printable buildings that I develop - then hit with the app's Bomb Blast tool. It is not an AI model: the blast is a real geometric operation on real solid geometry. A shell tears a crater through the building, walls and roof break open with jagged edges, and anything that loses its support falls away by itself.

That is what a generator gives you that a fixed STL cannot: one building, any state you want - intact, half-wrecked or a burnt-out shell, and you decide where the shell lands.

Try it free in your browser: https://printhaus.app

PrintHaus is launching on Kickstarter - following the pre-launch page costs nothing and notifies you when it goes live: https://www.kickstarter.com/projects/cforms/printhaus-your-custom-home-ready-to-print

Tagi