1 / 2
30mm Antweight wheels for 3mm d shaft with mould
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grippy and sturdy 30mm antweight wheels that fit on 3mm d shaft (N-motor)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I use these wheels for quite some time now. They are sturdy and grippy.
The rim is split into two parts, print the outer ring without any walls, bottom and top layers - basically just infill. That helps the polyurethane stick to the rim. I recommend something like 10% 3D Honeycomb.
I recommend polyurathene from Vythaflex, something between 10-30a. Also some mold release or just vaseline.
Use some superglue to keep the wheel on the shaft securely.
Here are they in action (3:35):
