Mag Release for the Gecko Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an addon modification for Ehdrien’s Gecko foam blaster. You need to purchase or assemble your own Gecko in…
- Ocena
- 4,5 / 5
- Polubienia
- 28
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 1181
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an addon modification for Ehdrien’s Gecko foam blaster. You need to purchase or assemble your own Gecko in order to make this Mag Release work.
Ehdrien's Gecko: Link
Extra Hardware you need:
- A spring in 5mm diameter, 18mm length, or similar
- A M3 nut
- A M3 35mm bolt
All details please see included pdf manual
LICENSED SELLER
This mod is under CC-BY-NC-SA license.
A commercial version of the mod is licensed exclusively to Rainbow Mods & Props, you can get it physically from Rainbow's shop. Visit his shop at: https://rainbowmods.com/
There is no functional difference between two versions. The Rainbow's version is only more polished and optimized.
22 March 2021 UPDATE
- An extra lever version that using the original Gecko hardware: (only hardware difference)
1x M3 30mm bolt
1x M3 5.7mm heat threaded insert
- Ambi version, hardware:
1x M3 5.7mm heat threaded insert
1x M3 30mm/35mm bolt (depending on which lever version you print)
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Sport & Outdoors