1 / 4
Prusa XL Freenove ESP32-S3-Wroom and ESP32 S3 Camera Dev Board Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for both the Freenove ESP32-S3-Wroom and ESP32 S3 Camera Dev Board to the XL.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of two different models adding breathing hex holes, and using the XL mounting hex. Larger dual USB hole to accommodate the cable that ships with these units. Holes for mounting the temp sensor, 15 & 30 degree tilt mounting option, Holes for the “flash” LED and more…
I find the 15 degree one to be about right.
Mounts the Freenove ESP32-s3 CAM to an XL. all you need is a M3x(20-25mm) screw. 25mm preferred.
The ESP's I used are:
https://amzn.to/4h2pwmz