LED Mount for Hero Me Gen4 Dual 5015 Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Links to Hero Me Gen4 by mediamanhttps://www.thingiverse.com/thing:3433619https://www.thingiverse.com/thing:3182917…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Links to Hero Me Gen4 by mediaman https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917
This is an update version of my previews LED bar mount for Hero Me gen3 (https://www.thingiverse.com/thing:4254593), specifically for Gen 4 Hero Me.
Mediaman, the author of Hero Me Gen4, has designed an LED bar mount for Gen4. Mine is a remix of his original design.
Specifically for LED strip up to 45 mm in length, 10~12 mm in width, 1 mm in back strip thickness. My LED strip is 38x12x1 mm, hard aluminium back.
PETG, ABS or other high-temp material is recommended for heat resistance in long run. PLA should be working fine, but it might warp in time.
- Lightweight
- Print strait forward with support
- Use brim if necessary
- A pair of M3 screws and nuts are needed to mount between two fans.
- Standard dual 5015
- Print without support
- Stabilize with 2 zip ties
- Improved air channel for better cooling
Category: 3D Printer Accessories