Jayyduit Mk. I - The novel solution for Cable Management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular cable track for custom wiring solutions
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Join the printsbyjayy discord server:
https://discord.gg/X9VbhrDzzM
I designed this to serve as a one off, modular design for cable management of small cables that you might need for your project and was inspired by cable tracks that I see in the field while working inside panels all the time. However, there seem to not be very many variations of it available on Thingiverse or Printables. I wanted to add my own spin on the concept and make it modular.
It provides a clean way of routing wires and cables either inside panels or outside of your machine.
Each section is 25x25x25 including the cover with a 15mm at its smallest point opening inside the track. There are little 1mm tabs in between sections that are designed to allow multiple pieces to snap or be cut off, so you can print 1 entire strip and turn it into sections. In order to find the custom width for your cad software, the section is 26mm wide with the tab. This modularity also applies to the cover. The total width of the given 8-piece section is exactly 207mm.
The internal hole for mounting to your project is 4mm wide with a 2mm chamfer, and the base is 3mm thick.
If you like this project, make sure to give this post a like and check out some of my other projects on Thingiverse and Printables! I appreciate your support!