Flock Falcon Surveillance Camera - Full scale

This remix is scaled 223% to approximately full scale, at 8.75" tall. I've added some internal shape modifiers to the OrcaSlicer 3mf file to increase back rigidity when printing with minimal lightening infill. When printed with 3 walls, 4 bottom layers, 3 top layers, and 10% Lightening infill, it yields good strength with minimal weight at approximately 63g. Additional mass was added around the screw holes via a shape modifier. 

The scaled pole mount is also edited to delete the end stop to allow placement anywhere along a 1/2-inch Schedule 40 PVC pipe. Although other pipe diameters will work. The cantilever design, along with two slightly loose zip ties, allows for easy repositioning and removal/reattachment to the pole. Use silver or white zip ties for prop realism. 

2x M5x20 button head machine screws are used for attaching the pole mount to the camera. M5x15 should also work. 

Adding six 8x4mm "self-adhesive clear rubber bumper pads/noise dampening feet for cabinets, drawers & glass tops" as the IR LED emitters is a cheap and easy way to improve the realism of this prop.