1 / 5
GoPro Hero3, Hero3+, Hero4 Mount for Creality Ender 5 Max UPDATE — zdjęcie 1
1 / 5

GoPro Hero3, Hero3+, Hero4 Mount for Creality Ender 5 Max UPDATE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

GoPro Hero 3 frame mount for Ender 5 Max crossbars. Includes 3 mounting options with full USB cable access.

Ocena
0 / 5
Polubienia
4
Pobrania
3
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1 + General Attribution v1

PLEASE BE CAREFUL

printhead will touch this thing if to close to the front (on bed-level calibration for example)

Updates

10.08.2026: After about 48 total print time, mine broke on inserting the gopro, so i made it more sturdy (only one variant) and made the "clip on" mechanism longer.

Description

A clip-on camera mount for the Creality Ender 5 Max, designed specifically for the GoPro Hero 3. It clips onto either the front or rear top crossbars of the printer frame.

As far as i am aware: It fits a Hero3+ and a Hero4 also, but i only have a Hero3 so thats the only guaranteed fit ;)

If your model is to close to the front (or back) the Printhead will touch your camera and probably everything will get destroyed. Be careful, i warned you.

Included Variations (3 Models)

Bottom Vertical (my favorite): Mounts underneath the bar vertically. This orientation offers the best view of the print bed and ongoing prints.

Bottom Horizontal: Mounts underneath the bar horizontally. (Wasted imagespace left and right)

Top Vertical: Mounts on top of the crossbar vertically. (You see a lot of printhead.)

All three models feature cutouts so you can keep a USB cable plugged in while printing.
You can move the exact location freely from left to right, except where the light-mount-screws are.
I personally think the inbuilt light is to bright, i have to take a look at this.

If you wanna see a example timelapse, i uploaded a short one in this model:

Usage & Power Notes

  • Power Supply: When capturing timelapses (e.g., 5-second intervals), the USB port on display units like the Creality Nebula Pad may not deliver enough power to charge or maintain the camera battery. I was using a dedicated external power adapter is recommended to keep the camera continuously powered.

  • Snap Fit: The clip holds the camera securely in place. The audible "click" is most satisfying right after printing, but the grip remains strong and reliable.

  • Print Settings: Works great printed with a 0.6mm nozzle at 0.35mm layer height, as well as a standard 0.4mm nozzle at 0.2mm layer height.

Oh... and by the way: there where several iterations to get it "mostly" right ;)

Tagi