GT3 Max Rear Cable Guard TPU 72mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom TPU Cable Guard for GT3 Max (72mm): Protects rear wiring from friction, sharp bends, and mechanical strain.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 1
- Wyświetlenia
- 12
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — NoDerivatives
GT3 Max Rear Cable Guard (72mm)
Custom-fit TPU cable guard designed specifically for the GT3 Max to protect rear wiring from friction and sharp bends.
Description
This is a custom-designed Rear Cable Guard (72mm) tailored specifically for the GT3 Max. It shields the rear wiring harness from sharp bend radii, accidental strain, and mechanical wear. Designed with precise geometry (72 mm total length, 51 mm inner spacing), it integrates seamlessly into the stock setup.
Features
Custom Fit: Engineered explicitly for the GT3 Max rear assembly.
Optimal Cable Protection: Smooth inner radius (R72) prevents pinched wires and fatigue over time.
Durable & Flexible: Designed specifically to be printed in TPU for maximum impact resistance and flexibility.
Print Settings & Recommendations
Material: TPU (flexible material recommended for proper functionality and vibration damping)
Layer Height: 0.2 mm (or 0.16 mm for smoother curves)
Infill: 15% – 25% (Gyroid or Grid recommended)
Walls/Perimeters: 3 - 4 walls
Supports: Not required (depending on print orientation)
Dimensions
Total Length: 72 mm
Inner Width / Spacing: 51 mm
Height: 14 mm