Modular Kitchen Rail / Tool Organizer System (3 Lengths: 30cm, 50cm, 55cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular kitchen rail in 3 lengths (30, 50, 55cm).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — NoDerivatives
A sleek, highly functional, and sturdy modular kitchen rail system available in 3 distinct length variations to fit any wall layout, cabinet side, or workshop setup. Perfect for hanging cooking utensils, towels, strainers, and kitchen tools.
Available Lengths & Applications
30 cm (300 mm) – Compact: Ideal for tight spots, side walls of kitchen cabinets, or narrow backsplash areas.
50 cm (500 mm) – Medium: Standard layout size for main prep areas and everyday utensil organization.
55 cm (550 mm) – Extended: Maximum storage space for wider walls and heavier cooking setups.
Material Selection (PLA vs. PETG)
PLA: Recommended for general dry environments. Offers highest rigidity, maximum stiffness against bending, clean surface finish, and minimal warping.
PETG: Ideal for areas near stoves, sinks, or high-humidity zones. Provides extra heat resistance, impact resistance, and long-term toughness.
Recommended Print Settings
Material: PLA or PETG
Layer Height: 0.20 mm (0.16 mm for smoother aesthetics)
Infill: 30% – 45% (Gyroid or Cubic for optimum load distribution)
Walls / Perimeters: 4 to 5 (Crucial to prevent sagging and ensure strong screw mounts)
Top / Bottom Layers: 5
Supports: None (Designed to print flat on the build plate)