1 / 7
Anycubic Mega/S Motherboard Fan Mount 9015 — zdjęcie 1
1 / 7

Anycubic Mega/S Motherboard Fan Mount 9015

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UPDATE June 30, 2021 -Added Fan_Suport_90x15_A_V2-tighter_nut_fit.stl Recommended Anycubic Mega/S Motherboard Fan…

Ocena
0 / 5
Polubienia
6
Pobrania
59
Wydruki
0
Wyświetlenia
838
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE June 30, 2021

-Added Fan_Suport_90x15_A_V2-tighter_nut_fit.stlRecommended

Anycubic Mega/S Motherboard Fan Mount 9015

Accommodates a 90x90x15mm fan. The centres of the 2 fan holes are exactly 80.15 mm apart. Fits perfectly inside my Mega S. You only need this piece to mount the fan onto the board (this would be Option 1 from the originalthing).Note, my stepper motor driver heatsinks are approximately 2 mm taller than the stock heatsinks and this mount still fits.

Why use this instead of the original?

The original piece, which was quite excellent, didn't leave much room between the X stepper motor driver, some other components, and the fan mount mount (A piece). I couldn't use the original without literally carving out some room. This remix has those areas carved out in the model itself.

Parts:

-9015 fan

-2 x M3 x 16 mm bolt

-2 x M3 nuts

-2 x M3 x 12 mm bolt

-hot glue recommended but not required

Hot Glue Instructions: (glue nuts in the perfect position)

  1. Attach fan to fan-mount using bolts and nuts.
  2. Hot glue the nuts onto the mount, filling any gaps between the nuts and the fan mount. Now, the mount can be left on the board and the fan can be removed/installed independently.

What fan am I using?

I'm using this 9015 fan.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

100

Filament: eSun PLA

Category: 3D Printer Parts

Tagi