Christmas tree baubles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple baubles to christmas tree (35 variants and sizes).
- Ocena
- 4,8 / 5
- Polubienia
- 1420
- Pobrania
- 5440
- Wydruki
- 91
- Wyświetlenia
- 22 378
- Oceny
- 75
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
Multiple baubles to christmas tree (35 variants and sizes).
Prepared for printing in vase/spiral mode - I recommended minimal 0,4 or 0,5 nozzle and set extrusion line width more than 100%. In some parts of baubles (overhangs) i use layer height 0,1 or 0,15, othervise 0,2 mm.
Must be printed upside down and you must add larger brim/skirt (8-10mm width).
Very good looking from transparent ABS (clear and red on images), transparent PLA is usable too (green on images). PETG I not tested.
Top handle i printed from gold/silver PLA. All inserted baubles using identical size of handle.
If you will change X/Y size of any bauble, you must print handle in identical size.
EDIT: some original files had bad size of bottom cylinder - I repaired it and upload new versions (with _fixed in name)
Print instructions
Category: Decor Print Settings
Printer Brand: Creality
Printer: Ender 2
Rafts: No
Supports: No
Resolution: 0,2 (somewhere 0,1 or 0,15)
Infill: no
Filament: Hobbyking, Gembird ABS, PLA clear, red, green, silver, gold