Hockey jersey hanger wall bracket (4 jerseys)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small L bracket I designed to hold 4 hockey jerseys. I needed something to condense my wall foot print.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE 11-2025 - Refined the design after breaking free from TinkerCad and started learning Fusion.
Small L bracket I designed to hold 4 hockey jerseys. I needed something to condense my wall foot print while still keeping my collection hung up.
This can be used with hangers in the normal or inverted position. Screw holes work with #6 wood screws and anchors. Will probably work with #8, just might have to thread the screw through the hole first. All three screw holes don't need to be used, I added three just to have options.
Also check out the hanger shoulder protector I made.
https://www.thingiverse.com/thing:3569265
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Filament: Hatchbox PLA Any
Notes:
Might need support on the screwdriver hole in the brace portion depending on how well your printer handles bridges.
Category: 3D Printing