1 / 3
Israeli scooter license plate frame and tire plug case for 40mm stems — zdjęcie 1
1 / 3

Israeli scooter license plate frame and tire plug case for 40mm stems

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Israeli license plate frame with mounting options for 40mm stems, including a case for a tubeless tire repair kit

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

This project solves two problems:

  1. Mounting and protecting the license plate

  2. Providing a case to carry a small tubeless tire repair kit (the exact model can be found here - https://www.aliexpress.com/item/1005008191630974.html) and a Schrader valve extension, necessary to inflate the tires with most common air pumps.

Printed with PETG using 40% infill. The frame should be printed flat down with supports, the rest require no supports.

The plate and frame should be connected to the scooter plate adapter using two M4 screws and nuts. the plate adapter is connected to the case using two M3 screws and nuts. Use locknuts or tighten well, otherwise, vibrations would loosen it quickly! 

The StemClamp.stl model is only useful for mounting the plate without the case or the case without the plate. 

Tagi