3030 M5 Drop-in T-Nut: Square Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed original to use an M5 square nut. Technically this is a ground up redesign with source file.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 88
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ground up rebuild, but used original dimensions and fillets. Primary change is using a square nut instead of a hex nut. Did also reduce the “lip” in the slot, as the original would have extended too far for the bolt to secure a flat surface to the 3030. Can provide a secondary version if someone wants that (eg, if you need a part to slide as opposed to being fixed).
Printed and tested, works fine for me. Comment if you have issues, original solidworks file posted as well. Should be a very easy remix for anyone looking for different bolt sizes if someone needs this in M3, M4, etc.