1 / 5
Garmin Varia & Magene Radar Mount for Ergon Saddles — zdjęcie 1
1 / 5

Garmin Varia & Magene Radar Mount for Ergon Saddles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple adapter that mounts Garmin Varia, Magene and compatible cycling radars directly to Ergon saddles.

Ocena
0 / 5
Polubienia
5
Pobrania
10
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted a clean and stable way to mount a cycling radar on my Ergon saddle without using seatpost clamps or additional brackets.

This design combines two excellent community models:

  • a Garmin Varia radar mount

https://www.printables.com/model/414948-garmin-varia-radar-saddle-mount-v2

  • a Topeak QuickClick-compatible interface

https://www.printables.com/model/1028627-topeak-quickclick-base

Many thanks to the original designers.

After some "Tinkercad engineering" 😉, I modified and merged both concepts into a single piece that slides directly into the QuickClick-compatible mount found on selected Ergon saddles.

The result is a compact and practical radar mount that positions the device neatly under the saddle while maintaining a suitable angle for radar operation, assuming the saddle is set approximately level.

I've been using it daily with a Magene radar, but it should also work with Garmin Varia devices and other compatible quarter-turn radar mounts.

Compatibility

Compatible with:

  • Ergon saddles featuring the integrated QuickClick-compatible interface

  • Garmin Varia radar systems

  • Magene radar systems

  • Other devices using the Garmin-style quarter-turn mounting interface

Please verify compatibility with your specific saddle before printing.

Printing Recommendations

Please notice, tha this part supports an expensive device and is exposed to vibration, weather and sunlight. It is designed to be printed without supports in the orientation shown in the STL file.

Printing Recommendations

- PETG recommended

- ASA or Nylon also suitable

- No supports required when printed in the orientation provided in the STL file

- For best strength, use 4-5 perimeters and a high-density infill