Ribbon Stemware Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under-cabinet wine glass rack. Support-free, modular, parametric, and prints in about 1 hour per rail
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Most under-cabinet stemware racks are designed for deep cabinets, use more material than necessary, or require large printers. I designed this one from scratch for a shallow cabinet in my home winery with a few goals in mind:
Prints without supports
Prints in about 1 hour per rail
Uses minimal filament
Clean, modern appearance
Fully modular design
Includes parametric OpenSCAD source for customization
The complete rack consists of four identical rails—no left- or right-hand parts to keep track of. Simply print four rails, mount them in pairs, and adjust the spacing to fit your stemware.
The default dimensions were designed around an 11½-inch (292 mm) deep cabinet and small to medium wine glasses, but the included OpenSCAD file makes it easy to adapt the design for different cabinet depths, glass sizes, or spacing.
Printing
No supports required
Prints flat on the build plate
PLA, PETG, or ASA recommended
Approximately 1 hour per rail on a Prusa Core One (your print time may vary)
Hardware
8 flat-head wood screws (two per rail)
Countersunk mounting holes are included
If you make modifications or adapt it for different glassware, I'd love to see your remix or photos!