Shark FlexStyle Wall Shelfs - Holds all 7 Attachments From Coscto Bundle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mountable set of shelves intended for the Shark FlexStyle. Holds all attachments that come in the Costco bundle.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount shelves for the Shark FlexStyle and all 7 attachments that come with the Costco bundle.
The brackets print individually from the shelves for two main reasons.
So you can choose which shelf is on top and which is on bottom
So everything prints in its strongest orientation
BOM:
Pick up the following from your local Ace or other hardware store:
QTY 8 M3x15 FH Screw
QTY 8 M3 HEX Nut
QTY 4 #4-6x7/8" Wall Anchors or equivalent (these usually come in a box of like 6-10)
Should be around 5 dollars in hardware give or take.
I printed this in PETG with a 0.6mm nozzle and 0.4mm layers (10% infill). If there are issues with tolerances or anything with other nozzle diameters/layer heights, please let me know. The fit for the hex nuts is tight, but don’t worry, they suck in easily.
You may need to use an xacto knife or similar to clear out any first layer squish from the screw holes.
Check out the counter-top version here: