Honeycomb storage wall insert for M6 bolts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb storage wall insert for M6 bolts. This is a method to create a robust peg for heavier items.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall insert for M6 bolts
This is a remixed insert that allow you to use an M6 bolt or M6 nut+threaded bar to create robust holders.
I needed to create a robust hook for my tools and none of the hooks i could find was robust or secure enough for my application. The original design does not include a holder for M6 bolts.
I have remixed one that can accomodate the M6 on a standard honeycomb wall. The recess is sufficient to accomodate a standard Hex head bolt head or a nyloc m6 nut for a threaded bar. You can see examples of the holders i created in the pictures.
Material recommendation: PETG but PLA could be used for lighter items.
Recommended printer settings:
Layer height: 0.2mm
Infill: 15%/20%, Gyroid
Walls: 3 walls minimum (3* 0.4mm nozzle)
Support: not needed