Underwater Viewer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create an Underwater Viewer using some 4''pvc sewer/drainage pipe, 3D prints, & clear polycarbonate.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
4" Sewer/Drainage PVC Pipe Underwater Viewer
This project is a fun and easy way to build an underwater viewer for both kids and adults. I had some leftover 4" sewer/drainage PVC pipe and decided to design these printable parts to put it to good use.
The design uses a section of 4" sewer/drainage PVC pipe along with a clear acrylic or Lexan disc to create the viewing window. Whether you're exploring lakes, rivers, ponds, beaches, or even your backyard pool, this viewer gives you a clear view of what's beneath the water's surface.
Important Note Before Printing
Before printing all of the parts, I recommend printing the smaller end cap first to test the fit on your specific 4" sewer/drainage PVC pipe. While 4" PVC pipe is generally standardized, the outside diameter can vary slightly between manufacturers and types of pipe.
If the fit is too tight or too loose, adjust the print scale accordingly until you get a proper fit before printing the remaining parts. This quick test can help prevent wasted filament and ensure the final assembly fits your pipe correctly.
Assembly
Print the two STL files.
Cut a circular viewing window from clear Acrylic or Lexan. I used a CNC router, but you can easily trace the outside of the 4" PVC pipe onto the plastic with a marker to create a template, then cut it out using a jigsaw, bandsaw, or another suitable tool.
Apply a bead of 100% silicone to the inside lip of the 3D-printed end cap, then insert the clear acrylic or Lexan disc. Next, apply a bead of silicone around the outside of the PVC pipe and press the end cap onto the pipe, creating a watertight seal. Wipe away any excess silicone and allow it to fully cure.
Apply a bead of 100% silicone to the inside of the 3D-printed handle or around the PVC pipe, then slide the handle assembly into place. Make sure it is fully seated and aligned, then allow the silicone to cure
Materials Needed
4" sewer/drainage PVC pipe
Clear acrylic or Lexan sheet
100% silicone sealant
3D printed parts (PETG)
Notes
I recommend using Lexan (polycarbonate) over acrylic if possible, as it is much more impact-resistant and less likely to crack if dropped.
The length of the PVC pipe is up to you. A shorter viewer is easier to carry, while a longer one allows you to look deeper into the water without getting as close to the surface.
I recommend printing the parts in PETG
I hope you enjoy building this project as much as I enjoyed designing it. If you print one, I'd love to see your photos and hear where you used it. Happy exploring!