Drawer and Door Handle Drilling Template — 32 mm System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printed cabinet handle drilling jig with seven metric spacings and an adjustable centering guide.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
A practical drilling jig for cabinet handles
The HF-CT-004 Handle Drilling Template helps position and guide-drill mounting holes for handles oncabinet doors and drawer fronts.
The Main Guide includes these fixed center-to-center dimensions:
64 / 96 / 128 / 160 / 192 / 224 / 256 mm
All positions follow a 32 mm progression.
The adjustable T Guide slides inside the Main Guide and locks with a printed knob. No screws, nuts orinserts are required.
For a centered handle on a drawer front:
Mark the horizontal center of the drawer.
Set the T Guide to half the drawer height.
Align it with the center mark.
Select the correct handle spacing.
Guide-drill using a 3/32-inch drill bit.
The T Guide adjusts up to 150 mm, supporting centered installation on drawer fronts up to 300 mmhigh.
Why this model is useful
Reduces repeated manual measuring
Uses fixed spacing positions
Helps keep repeated installations consistent
Requires no additional hardware
Prints without supports
Worn Main Guides can be replaced without reprinting the full tool
Included files
Main Guide
T Guide
Knob
Complete 3MF project
Tested printing setup
PLA and PETG
0.80 mm nozzle
0.30 mm layer height
4 perimeters
15% infill
Flat orientation
No supports
Approximate print time: 2 hours
Build volume
The assembled print layout requires a print area of at least 220 × 220 mm.
Compatibility
Tested with compatible handles from:
Häfele
Handy Home
Herraxa
Hettich
Always verify the real center-to-center dimension before drilling. Compatibility is determined byspacing, not only by brand.
Amerock and Sugatsune were not physically tested. Handles outside the included metric spacings arenot supported by this version.
Wear and replacement
The Main Guide is a wear component. Reprint it when the guide holes become enlarged or damaged.
Share your make
This model is free because the main goal is to see it used in real workshops.
Print it, test it and upload a make showing:
The printed jig
The handle spacing used
The finished drawer or cabinet door
Feedback from real installations will help guide future HEFENT Cabinet Tools.
HEFENT · Printable Workshop Tools
Printable tools for real workshops.