Lip Brush Holder for Vaseline 50ml Jar Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-in clip that holds a small silicone lip applicator inside the lid of a Vaseline 50 ml jar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
A tiny snap-in holder that mounts inside the lid of a Vaseline 50 ml jar, so your lip brush always travels with the balm.
What you get
Two-step insertion, numbered on the part itself: slide the handle into the closed-top pocket (1), then snap the brush end into the clip (2)
The pocket is closed on top by design — the brush cannot sit half way in and rattle loose
Holder size 47 x 10.4 x 14.1 mm
Mounts with a strip of strong double-sided tape, no screws
Fit check
Vaseline Original Protecting Jelly, 50 ml jar lid
Silicone lip applicator, 46 mm long with an 11 x 7 mm head (sold widely as a silicone lip brush)
Wipe the inside of the lid clean and dry before taping
Print settings
FDM, PLA or PETG.
0.2 mm layers / 3 walls / 20% infill / no supports
Print flat in the orientation the file opens in — about 20 minutes and a few grams
Support me
If this design was useful to you, you can buy me a coffee ☕
Need a different size?
STEP file is included alongside the STL and 3MF, and the full Onshape source is public: Onshape document
LICENSE: CC BY-NC