1 / 7
Display Stands - MAINGEAR ZERO — zdjęcie 1
1 / 7

Display Stands - MAINGEAR ZERO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two ways to make your ZERO yours: a 16 × 14 stud brick stand or a stepped figurine stand. Print, install, display.

Ocena
5 / 5
Polubienia
2
Pobrania
3
Wydruki
1
Wyświetlenia
65
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Make the space in front of your ZERO’s fan stack your own. Choose a 16 × 14 stud brick stand or a stepped figurine stand to display your favorite build inside the case.

Both stands use the same mounting location, so install one at a time. The download includes both stands and the mounting peg model.

Print recommendations

Print both stands flat side down. No supports are needed.

PLA or PETG are good choices. Avoid ABS and ASA for the brick stand: shrinkage can affect the stud dimensions and brick fit. Print one peg first to check the fit in your stand before printing all four.

Installation

  1. Print your chosen stand and four pegs.

  2. Insert the dimpled end of each peg into one of the four holes on the bottom of the stand. Fit may vary with your printer and slicer settings; a light tap may help seat the pegs.

  3. Align the pegs with the holes in the unused 120 mm fan position in front of the fan stack, beside the curved front glass. Press the stand into place.

  4. Add your bricks or figurines and make it yours.

Want a ZERO? Explore it at https://maingear.com/collections/zero

Prefer a finished set?  https://maingear.com/collections/zero-stands/products/zero-stand-bundle 

Tagi