1 / 2
Sovol SV08 Max stock part cooling duct as 1 piece and as 2 seperate pieces — zdjęcie 1
1 / 2

Sovol SV08 Max stock part cooling duct as 1 piece and as 2 seperate pieces

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a slightly modified for 3d printing stock cooling fan duct for the Sovol SV08 Max and SV Zero.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The stock fan duct is a 2 part snap together design. I merged the two pieces and trimmer a bit from the bottom to make it print with supports.

Recommended print settings:

  • Filament: ABS, ASA, (maybe PETG)

  • 0.2mm or smaller layer height

  • iron support interface

  • use different filament for support interface (use PLA for interface with ABS or PETG)

Tagi