Custom Flex3Drive v5-Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom version of the Flex3Drive Lite (https://flex3drive.com/) It has been modified to accommodate my…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a custom version of the Flex3Drive Lite (https://flex3drive.com/) It has been modified to accommodate my modular latching system and a PTFE filament feed line.
The hardware kit is available from the flex drive website.
NOTE: These renders show an experimental vacuum feed-line. This is currently experimental and far from perfection, should the results prove valuable I will post a separate procedure on how to modify the E3D V6 to make use of this feature; however, this design will work just as well without it.
Category: 3D Printer Extruders