1 / 1
Molex Connector Shroud & Clip for In Line Splice of 0.100in (2.54mm) Pin Spacing — zdjęcie 1

Molex Connector Shroud & Clip for In Line Splice of 0.100in (2.54mm) Pin Spacing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

STL models to provide in line wire splicing for Molex Series 2695-NR & 2695_NRP (polarized) Connectors.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I have used these Molex Connectors in about every electronic board I designed over 40 years.  Recently I needed a compact, secure in line splice for small gauge (28-22 AWG Wire, 1.09-1.57mm).  Having a plethora of these connectors I took to making an inline splice using them.  

Provided are STL files for 2, 4, 6, 8, 10 and 12 pin bodies.  Also for short caps that only cover one connector, and a double length top/lid that ties the two together with a pin body/header (male to male) to connect to the two female Molex Connectors.

If you need variants of these, mention in the comments and I will see if I can create and or revise to your request.  I am an ol' guy (over 70) and the memory is not pristine.  If there is something like this already out there, please let me know and I will give the author proper credit.  I did create these, but can't remember if I say a Molex Connector strain relief years ago.

Sizes were tuned to print on a K1C in PLA2+  with no supports.  The lids clip tightly, but I have not broken one yet taking them on and off.

Tagi