Chamber light mount INDX Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap mount for the chamber light in the Core One INDX. Improves first layers lighting.
- Ocena
- 4,959 / 5
- Polubienia
- 204
- Pobrania
- 578
- Wydruki
- 54
- Wyświetlenia
- 3074
- Oceny
- 73
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
Replace the original nozzle seal holders and mount the chamber light bar where it used to be for better lighting on the first layers. The metal bar with the chamber light snaps into place and no additional hardware is needed.
Confirmed to work for both PE and FE front plates.
Prusa Edition: All four nozzle seal holders need to be replaced.
Founders Edition: Only two new holders is needed.
Needs supports. Printed with PETG with PLA support interface. 3 walls, gyroid infill.
When mounting, it may help to remove the two bottom screws holding the front plate.
2026-09-01: PE version - moved the lightbar 3 mm inward to clear the screws
2026-08-31: Added PE version