Ducted cooling for 20x40 V-Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ducted cooling system. Name sums it up. It's designed to attach to a 20x40mm V-Rail. the fans are Sunon…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a ducted cooling system. Name sums it up.
It's designed to attach to a 20x40mm V-Rail.
the fans are Sunon 40x40x28mm MagLev (GM1204PQV1-8A) https://www.amazon.com/gp/product/B00118ZWYY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The tubing can be any 1" ID spiral pipe, this is what I used: http://www.ducting.com/ambient-air/dehumidifier-ducts/pvc-flexduct-general-purpose-blue.html
NOTE: On request I have assembled this using standard CPAP hose, it works fine but with less airflow.
The cooling shrouds are missing, I am waiting on the delivery of my dual tool Flex3Drive before I can get the measurements going; However, the intake/exhaust manifolds should bolt onto any 40mm fan housing.
UPDATE: I have added the lower intake model as well as some images of the system installed and running. I will likely create some kind of hose clamp to keep everything in place and to arrest vibrations. I will post the stl when I have it finished :)
UPDATE: I added an intake manifold for a smaller format AC unit. This one has some threads I am experimenting with to make hose connection easier.
UPDATE: I also added the hose clamp that I have been using to keep everything neat and tidy :)
Category: 3D Printer Parts