Rail Mount for FilaBilly Dehumidifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach the dehumidifier to the FIlaBilly rails
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This pair of brackets mounts a FilaBilly Dehumidifier to the rails inside a FilaBilly bookshelf. It screws onto the dehumidifier and clips securely onto the rails.
I modeled this in FreeCAD 1.0. I've included both the FreeCAD source and a .STEP file so you can modify it as needed. (I only modeled the right bracket. You can mirror it in the slicer for the left side.)
How to Print
I suggest PETG. Layer height, perimeters, infill are not critical. Print one of each side.
Vitamins Needed
Item | Quantity |
|---|---|
M5x18 socket head cap screw | 4 |
M5 nylon locknut | 4 |
Assembly
Press the lock nuts into the dehumidifier's feet. Screw the mounting brackets on. N.B., orient the brackets so the dehumidifier is offset toward the back, as shown in the photos. Clip the assembly to the rails.