Portable Android Auto Carplay Mount Compatible with Honda Element
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the original version to fit the Honda Element. The specific unit I use is the 9.26" Krunia unit from Amazon
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
From the original version, I lifted and tilted forward the main mount to work on the dash of the Element. After trying it out, there was a little slop from side to side, so I added a couple of tabs that touch the back of the unit near the outside. I put a tiny piece of 2-sided tape on each tab so that when the display unit slips onto the mount in the middle, the two sided tape touches the unit itself and stops any rocking motion. It has been rock solid since adding those tabs.
I printed with ABS at about 20% infill I believe.