Crash B-Daman 033 S.W.S Mega Grenade!

Shout out to Shayan! He provided me with the Mega Grenade to clone!

I did NOT want to release this until is was perfect. Shayan gave me this back in December.  Months of test fitting, getting every detail, 3 months of collectively being sick, 5 work conventions, and like 3 funerals later, here we are

Designed to be backwards compatible with the OEM 033 Mega Grenade. If you are missing or broke any part of your original Mega Grenade, you can just print the part you need!

Edit 8/10

Apparently, I flew too close to the sun. Unless you have a fine tuned printer, don't attempt to print. 

My tolerances did not allow any room for error. Everything I print has at least 0.1mm of clearance.

You have been warned! Happy printing! Looser tolerance version coming later!

HOW TO PRINT

Print everything in the orientation it loads in. Most may not need outer brims. If you experience warping and lifting from the bed; add 8 outer and inner brim to the model. This is more so for the upper & lower body.

Print with supports. Normal, NOT TREE! I used a Bambu Lab H2D so I was able to print with 2 material and used one as a support layer (PLA supports PETG / PETG Supports PLA/ etc). This details is important to get the most accurate print as intended. I have not tested these models without "Use [X] as support" personally but I'm sure (depending on your printer, settings, and filament choice) 0.165 Z Hop Distance in Support Settings will help achieve the intended accuracy. 

Mikan tested this out. I designed this with extreme accuracy and tight tolerance. So, anyone WITHOUT a multi colour printer / Bambu Lab H2D, H2C, etc WILL have issues. My design with my tolerance did not require sanding but Mikan Had to sand things down to fit right because they tested with supports and Z hop at .16mm like mentioned. This was enough to throw off the accuracy of the print. 

THANK YOU MIKAN!

For the grenade ball itself, there are 2 files provided. both files have been named to what they should be scaled to respectively.  I did not like how my grenade designs came out, so, I stole borrowed designs from Pabalo and Gillis and scaled them to proper size. The size of the grenades should be 24.9MM. Each design has a different scale because the holes cause the sizing to be off. Scaling to 24.9mm realistically prints the ball at 25.4mm. Grenades should be printed using tree supports. Paint block supports on the inside of the grenade.

PRINT THE PRONGS IN PLA! 

Tensile strength must be as high as possible. PLA has the highest layer to layer tensile strength.

ASSEMBLY

Watch this Rollout Review and that's basically it. Just remember to install the prong tabs.