Halibut Hook Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Built-in plastic spring reopens the jaws. Pull the hook out with style.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Full-size hook remover tool. Removes hook from big fish.
Miniature tool. made as a joke, to humiliate the guy with a baby-sized catch.
Seriously, though. 50% is one-finger size.
For kids size, scale to maybe 75%, not 50%.
Requires four 3/4" #8 stainless screws and one 1/2" stainless screw.
PETG settings in .3mf file
0.4mm nozzle
0.2mm layer height
dry filament
level bed carefully
printed upside-down at a 45° angle to preserve detail
organic supports.
"fuzzy skin" on outer side of grips
230°C/90°C first layer
50% speed.
Clean off any residue & glue right & left halves of center piece (trigger).
Insert lanyard.
Fasten together with 4 #8 3/4" stainless screws, 1/2" screw for the bottom jaw, 3/4" for the top.
Ream holes if screws fit too tight.